Negotiable
The date of payment from buyers deliver within days
Jiangsu
Long-term effective
2020-07-31 20:39
209
Company Profile
By certification [File Integrity]
Contact：clbzjx(Mr.)
Email：
Telephone：
Phone：
Area：Jiangsu
Address：Jiangsu
Introduction
Corrugated cardboard production line is the professional equipment for producing corrugated cardboard.The production line consists of the Mill Roll Stand, liner(medium paper ) Pre-heater, Single facer machine ,Conveyor bridge , Gluing Machine, Double facer machine , Slitter Scorer , Cut-off , Conveyer and Stacker, Heating System ,Air compression system and Glue Making System and so on.
Our products
Specifications
1 |
Max. working width |
1600mm |
2 |
Design speed |
150m/min |
|||
3 |
3ply Working Speed |
110-130m/min |
4 |
5ply Working Speed |
100-120m/min |
|||
5 |
7ply Working Speed |
------------------- |
6 |
Max. Order Replacing Speed |
100m/min |
|||
7 |
Length Cutting Precision |
±1mm |
8 |
Transverse Cutting Precision |
±1mm |
|||
Note |
Above speed must be based on following index: wording width 1600mm and accord with below paper standard. Meanwhile, make sure the surface heating temperature of equipment is over 175℃. |
|||||||
Surface Paper |
100g/㎡--180g/㎡ Ring Crush Index（N.m/g）≥8 (Water Content: 8-10%) |
|||||||
Core Paper |
80g/㎡--160g/㎡ Ring Crush Index（N.m/g）≥5.5 (Water Content: 8-10%) |
|||||||
Inner Paper |
90g/㎡--160g/㎡ Ring Crush Index（N.m/g）≥6 (Water Content: 8-10%) |
|||||||
9 |
Flute Profiles |
A, C, B, E or according to client’s requirements |
||||||
10 |
Steam Demands |
Max Pressure 16kg/cm2 |
Ordinary Pressure 10-12kg/cm2 |
Consumption: 4000kg/Hr |
||||
11 |
Electricity Demands |
AC380V 50Hz 3PH |
Installed Capacity≈220KW |
Normal Power≈150KW |
||||
12 |
Compressed Air |
Max Pressure 9kg/cm2 |
Ordinary Pressure 4-8kg/cm2 |
Consumption: 1m3/min |
||||
13 |
Covering Area |
≈L70m*W10m*H5m (Min) (The actual one will be based on Buyer’s drawing) |
||||||
Technical Parameters
1. Paper Width: 1450mm
2. Preheating roller diameter : ￠600mm. Angle adjusting range : 180°Rotating
Angle shaft diameter: ￠80mm×2.
3. Steam Temperature:150-180℃ Steam Pressure:0.8-1.3Mpa
4. Dimensions: L3.3m*W1.1m*H1.3m. Weight: Max. 1000kg
5. Working Power Supply: 380V/50Hz
6. Power: 250 W. S2 short-terms working form.
Production line
Features
1) Simple structure in linear type ,easy in installation and maintation.
2) Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts.
3) Running in a high automatization and intellectualization,no pollution
Our factory
http://www.bgd-world.com/
